Editorials and Journals


PUBLICATIONS AND PRESENTATIONS


Published and presented over 150 papers in reputable journals and proceedings of national and international conferences. Delivered 48 invited professional lectures at national and international conferences, professional societies, and technical institutions.

  • Chief Editor and Managing Editor, International Journal of Agile Manufacturing (IJAM), 1997 to 2001. At present Co-Editor.

  • Chief Editor and Managing Editor, International Journal of Advanced Manufacturing Systems (IJAMS), 1997 to date

  • Associate Editor & Founding Editor, International Journal of Concurrent Engineering: Research and Application (CERA), 1993 to date.

  • Chief Editor and Founding Editor, Journal of Advanced Manufacturing Systems (JAMS),1997 to date.

Partial Publications (Reviewed Journal Publications)

1. Saritha Subramaniyam Ethirajan, Suren N. Dwivedi "Integrated Product and Process Development Using Virtual Reality- submitted to International Journal of Product Development (IJPD), 2006.

2. Paras Gupta, Suren N. Dwivedi. "Lean Implementation in High Variety-Low Volume, Low Variety-Low Volume, and Low Variety-High Volume Environment- submitted to International Journal of Process Management and Benchmarking (IJPMB), 2006.

3. Dwivedi, Suren N.; Lyons, Donald W. and Lanka, Ravi, "A Perspective on the Analytical Prototype Process," International Journal of Product Development, 2 (1/2), 138-154, 2005.

4. Bhake Chetan, Dwivedi Suren N. "Value Stream Mapping for Lean Implementation", International Journal of Advanced Manufacturing Systems, 2005.

4. Choudhary Alamgir, Ramrattan Sam, Ikonomov, Dwivedi Suren N.," A Web-based Approach for Ream -time Process Control", International Journal of Advanced Manufacturing Systems, 2005.

5. Ranga, Phanikanth and Dwivedi, Suren N., "Research Issues In Responsive and Agile Manufacturing," International Journal of Agile Manufacturing, 7 (2), 45-52, 2004.


6. Frank, Christian; Gordoni, Mickael and Dwivedi, Suren N., "A Knowledge Management System for Industrial Research Processes - EADS Case Study," International Journal of Agile Manufacturing, 7 (2), 59-66, 2004.

7. Duhovnik, Joze; Starbek, Marko; Dwivedi, S. N. and Prasad, Biren, "Development of Innovative Products in Small and Medium-sized Enterprises," International Journal of Computer Applications in Technology, 17 (4), 2003.

8. Dwivedi, S. N.; Shrivastava, Kamal; Swarup, Rahul and Hansraj, Sharma K., "Multi-objective Process Optimization of Hot Closed Die Forging for Intelligent Manufacturing," International Journal of Advanced Manufacturing Systems, 7 (1), 61-69.

9. Dwivedi, S. N.; Kumbakonam, Aravind and Yammada, J., "A Knowledge-based Engineering Approach for Cycle Time Estimation for Plastic Injection Molding Process," International Journal of Material and Product Technology, 19 (5), 337-350, 2003.

10.S. N. Dwivedi, "Current Trends in Material Management in the Shipbuilding Industry."- Accepted for publication in International Journal of Computer Application Technology, Volume 16, No.1, 2003.

11. Ikonomov, Pavel G.; Milkova, Emiliya Dimitrova and Dwivedi, Suren N., "Design Tolerance Suitable for Manufacturing and Assembly in Concurrent Engineering," International Journal of Advanced Manufacturing Systems, 4 (2), 103-117, 2002.

12. Ikonomov, Pavel G.; Milkova, Emiliya Dimitrova and Dwivedi, Suren N., "Virtual Reality Process Simulation System," International Journal of Advanced Manufacturing Systems, 4 (2), 19-31, 2002.

13. Meredith, Paul H.; Kolluru, Ramesh; Dwivedi, Suren; Smith, Mark; Keaty, Ann; Kernodle, Jeff; Peck, Jack and Davis, Steve, "A Model of Commitment to Supply Chain Collaboration: Overcoming Resistance to Participation in Collaborative Planning, Forecasting, and Replenishment," International Journal of Agile Manufacturing, 5 (1), 89-101, 2002.

14. Kolar, Madhusudhan; Dwivedi, Suren N. and Maffioli, Peppino, "Total Value Management in Shipbuilding," International Journal of. Manufacturing Technology and Management, 4 (6), 521-543, 2002.

15. Dwivedi, Suren N. and Kumbakonam, Aravind, "Effective Team-building Process and Team Leadership for Integrated Product and Process Development," International Journal of Human Resources Development and Management, 2 (3/4), 415-435, 2002.

16. Dwivedi, Suren N. and Sharan, A., "Development of Knowledge-based Engineering Module for Diagnosis of Defects in Casting and Interpretation of Defects by Nondestructive Testing," Journal of Material Processing and Technology, 8 (1), 1-8, 2002.

17. Mangala, A.; Jaysuriya, M.; Dwivedi, S. N.; Sivaneri, Nithi and Lyons, Donald W., "Double-curved, Laminated Composite Shells with Hydrothermal Conditioning and Dynamic Loads, Part 1: A Theoretical Development and Semi-elastic Solution Using a Higher-Order Displacement Field," Mechanics of Advanced Materials and Structures, 53-68, 2002.

18. Mangala, A.; Jaysuriya, M.; Dwivedi, S. N.; Sivaneri, Nithi and Lyons, Donald W., "Double-curved, Laminated Composite Shells with Hydrothermal Conditioning and Dynamic Loads, Part 2: FEA and Numerical Results of Shells of Revolution," Mechanics of Advanced Materials and Structures, 69-97, 2002.

19. Joze DuHovnik, Marko Starvek, S.N.Dwivedi, Biren Prasad, "Development of New Products in Small Companies", Concurrent Engineering: Research and Applications, Volume 9, No. 3, pp. 191-210, 2001.

20. John C. Peck, Steve Davis, Bill Kernodle, Chris Jarvis, Roy Pargas, Ramesh Kolluru, Paul Meredith, Stanford Smith Al Steward, Suren Dwivedi " Information Support For Supply Network Management", International Journal Of Agile Manufacturing, Vol. 3, Issue2, p103-108, 2000.

21. Ramesh Kolluru, Paul Meredith, Al Steward, Mark Smith, Stan Smith, Suren Dwivedi, Jack Peck, Steve Davis " An Extended Enterprise Framework For Supply Network Management" International Journal Of Agile Manufacturing, Vol. 3, Issue2, p77-102, 2000.

22. Dwivedi, S. N., and Sharan R., "Development of Knowledge-Based Engineering Module for Diagnosis in Casting and Interpretation of Defects by Non-destructive Testing," International Journal of Agile Manufacturing, Vol.3, Issue1, 33-46, 2000.

23. Dwivedi, S. N., Raman, A. K., and Sharma, J. P., "Integrated Agility and Quality in the Manufacturing Business," International Journal of Agile Manufacturing, 2:2, pp. 231-245, 1999.

24. Dwivedi, S. N. and, Ikonomov Pavel G., "Virtual Assembly for Concurrent Design," International Journal of Advanced Manufacturing System, Volume 1, No. 2, pp. 235-248, 1998.

25. Cryster, T., Nandi, G. C., Dwivedi, S. N., "Finite Element Design of Manipulator Coupled Spacecraft for a Research Testbed," International Journal of Intelligent and Robotic Systems, 1995.

26. Padhy, Sisir K., Dwivedi, S. N., "Heat Transfer Analysis of a Rolling Piston Rotary Compressor," International Journal of Refrigeration, 1995.

27. Sanders, J., Schempf, Dwivedi, S. N., Nandi, G. C., "Deflection Characteristics of Redundant Robots," Journal of Intelligent and Robotic Systems, 1995

28. Dwivedi, S. N., Kulpa, Z., Sobolewski, M., "Graphical and Natural Language Interface with a Knowledge-Based Concurrent Engineering Environment," International Journal of Computers in Industry, 23 (1993) 175-184, 1994.

29. Dwivedi, S. N., and Upadhyay, K., "Plasma Aided Manufacturing of Ceramics and Composite Materials," International Journal of Production Research, Vol. 31, No. 4, pp. 901-912, 1993.

30. Dwivedi, S. N., and Shankar, R., "Analytical Simulation of Rib-Web Forging," International Journal of Production Research, Vol. 31, No. 5, pp. 1047-1068, 1993.

31. Pandiarajan, V., Dwivedi, S. N., "Feature Based Expert Process Planning CAD System in Concurrent Engineering," Manufacturing Systems, Vol. 22, No. 1, 1993.

32. Padhy, Sisir K., Dwivedi, S. N., "An Object Oriented Knowledge-Based System for Manufacturability of Printed Wiring Boards," International Journal of Computers in Industry, Vol. 18. No. 1, pp. 77-89, Jan. 1992.

33.Dwivedi, S. N., Mahalingam S., "AMBLER: Its Application on Rough Terrain," Journal of Complex Automation Control Problems, No. 1, Feb. 1992.

34.Dwivedi, S. N., and Mahalingam, S., "Terrain-Adaptive Gaits for the Ambler," Journal of Advanced Robotics, Robotics Society of Japan, 1991.

35.Dwivedi, S. N., and Shankar, R., "Enhanced Forging through Computer Simulation," Journal of Advanced Materials and Processes, pp. 23-31, Feb. 1990.

36.Dwivedi, S. N., "Design for Manufacturability," Handbook of Manufacturing: Automation and Integration, Auerbach Publishers, 1990.

37.Dwivedi, S. N., "Development of Constitutive Equations and Processing Maps for Inconel 718," Journal of Materials Science, 1990.

38.Dwivedi, S. N. and Klein, Barry R., "Design for Manufacturability Makes Dollars and Sense," Journal of CIM Review--A Journal of Manufacturing and Management, Vol. 2, No. 3, pp. 53-59, 1986.

39.Dwivedi, S. N., and Kupic, Joseph, "A Fully Automated System for Electronic Assembly and Testing," CIM Review--The Journal of Computer Integrated Manufacturing Management, Vol. 2, No. 4, 1986.

40.Dwivedi, S. N., "Kinematic Analysis of Regional Structure of Robots Containing One or Two Prismatic Pairs," Journal of Engineering Sciences, Vol. 10, Nov. 1-2, 1984 (Pergamon Press).

41.Dwivedi, S. N., "Application of Whitworth Quick Retum Mechanism for High Velocity Impacting Press," Journal of Mechanism and Machine Theory, Vol. 19, No. 1, pp. 55-59, Jan. 1984.

42.Dwivedi S. N., and Sharan, R., "Influence of Mischmetal Additions on the Aging Characteristics, Machineability and Mechanical Properties of Aluminum-Copper Alloy," Journal of Aluminum, Vol. 59, No. 7, pp. El75, July 1983.

43.Dwivedi, S. N., "Design and Fabrication of an Inexpensive Robotic Arm," Journal of Institution of Engineering, pp. 24-29, Oct. 1983.

44.Dwivedi, S. N., "Plane Strain Viscoplasticity for Dynamics and Quasi-Static Deformation Process," ASME Transactions, Journal of Engineering for Industry, Sept. 1983.

45.Dwivedi, S. N., "Rare Earths--As Alloying Elements in Casting," Journal of Birla Institute of Technology, Ranchi, April 1975.

46.Dwivedi, S. N., Jain, V. K. and Shukla, D. P., "Effect of Liquid Environments on Notched Fatigue Strength of Mild Steel," Journal of Institution of Engineers (India), Vol. 68, 1974.

47.Dwivedi, S. N., "Environmental Effects on Fatigue Strength of Metals," Journal of the Society of Mechanical Engineering, Banaras Hindu University, April 1972.